Thumbnails

j_laurant's Avatar

j_laurant

08 Jun, 2014 01:59 PM

Hello,

I need to make a website with berta for school. I'm having problems with the thumbnails. I have made a layout with the correct size of the image, but when I open the image it still shows the small image. I've enterd my storage via filezilla and replaced the image that i wanted to show. But for some reason when I log in and out in my engine he replace my thumbnail with the large image.

http://dbkv-showcases.artez.nl/~J.Laurant/ this is my website for school.

I also have a question about anchor points. How do I create an anchor point? :P

Kind regards,

Juliette

  1. Support Staff 1 Posted by Uldis on 09 Jun, 2014 06:44 AM

    Uldis's Avatar

    Hi, Juliette
    Berta is generating needed image sizes based on the setting under "settings - media" automatically. Image is downsized only if it's bigger than specified size.

    You can make anchor links by adding #your-anchor at the end of the link. This can be done under section - specifying link type as external (example link: http://yourdomain.com/section-one#your-anchor). In the same way you can add a link inside entry description field.
    Next you need to add an ID attribute for HTML tag where you want the link to go.
    Again enter description field editor and press the HTML button. Add ID to HTML element you want, example:

    <p id="your-anchor">Lorem ipsum text</p>
    

    good luck

  2. Uldis closed this discussion on 09 Jun, 2014 06:44 AM.

  3. j_laurant re-opened this discussion on 09 Jun, 2014 08:44 AM

  4. 2 Posted by j_laurant on 09 Jun, 2014 08:44 AM

    j_laurant's Avatar

    Hi,

    The replacing images are 800x533 pixels of 533x800. I use a medium image size. Under settings Medium has a pixel rate of 400 height and 400 width. If I change both to 800 i wont have any problems anymore?

  5. Support Staff 3 Posted by Uldis on 09 Jun, 2014 09:04 AM

    Uldis's Avatar

    Should be ok, you can play around with image sizes without loosing anything. Image resizes procedure happens on user request - before image gallery is shown on screen (not immediately after upload).

    have a nice day

  6. Uldis closed this discussion on 09 Jun, 2014 09:04 AM.

  7. j_laurant re-opened this discussion on 13 Jun, 2014 01:28 PM

  8. 4 Posted by j_laurant on 13 Jun, 2014 01:28 PM

    j_laurant's Avatar

    Hi Uldis,

    Otto here.
    Trying to fix the anchor issue. What I did:
    - linking an image at the top of the website to http://dbkv-showcases.artez.nl/~J.Laurant/?section=niet#fotografie-...
    - linking the html-description of an image at the bottom of the website to

    Lorem ipsum text

    It doesn't do the trick like this. Can you tell me what's wrong?"

    Kind regards,
    Otto.

  9. Support Staff 5 Posted by Uldis on 13 Jun, 2014 02:08 PM

    Uldis's Avatar

    Hello, Otto,
    you should add ID attribute in HTML code. This ID attribute will be as an anchor, the position to where the site will be scrolled down.
    Click on the entry description field and press the HTML button, insert code:

    <div id="fotografie-anchor"></div>
    
    Then visiting link http://dbkv-showcases.artez.nl/~J.Laurant/?section=niet#fotografie-... page will be scrolled down to the place where this ID is placed in HTML.

    Let me know if this works

  10. 6 Posted by j_laurant on 13 Jun, 2014 06:50 PM

    j_laurant's Avatar

    Hallo,

    Now one anchor works, but if I want to make more anchorpoints on the same page he doesn't work.
    As example this anchor:
    http://dbkv-showcases.artez.nl/~J.Laurant/?section=niet#toekomst-an...

    Do you know what I do wrong?

    And can you tell me how I remove a ancher when it is on the wrong place?

    Kind regards,

    Juliette

  11. Support Staff 7 Posted by Uldis on 16 Jun, 2014 07:15 AM

    Uldis's Avatar

    Hi,
    the ID attribute in one page should be unique, don't place more than one ID attribute with the same name. I can see than you have more than one element with ID "toekomst-anchor".
    You can add and remove those ID attributes through text editor using HTML button.

    Good luck

  12. Uldis closed this discussion on 16 Jun, 2014 07:15 AM.

  13. j_laurant re-opened this discussion on 16 Jun, 2014 03:23 PM

  14. 8 Posted by j_laurant on 16 Jun, 2014 03:23 PM

    j_laurant's Avatar

    Hi,

    I can't find the dubbel one in the HTML button because when they work they are gone. Looks like they are absorbed.

    It is about http://dbkv-showcases.artez.nl/~J.Laurant/?section=niet#docent-anchor
    and
    http://dbkv-showcases.artez.nl/~J.Laurant/?section=niet#contact-anchor

    And I have another problem, Berta creates on his own gallery's. It takes pictures from diffrent locations.

    Kind regards,

    Juliette

  15. Support Staff 9 Posted by Uldis on 17 Jun, 2014 06:19 AM

    Uldis's Avatar

    Oh, yes, that's because empty DIV doesn't occupy space and becomes unavailable to edit, but we have fixed this problem, you need to upgrade your Berta system files from here http://berta.me/download/ - just replace all files, except "storage" folder.

    Berta creates his own galleries? Wow, isn't it great? It's a new feature of Berta :) ... but seriously? Try to delete this entry and create a new one instead.

    Let me know your progress.

  16. Uldis closed this discussion on 17 Jun, 2014 06:19 AM.

  17. j_laurant re-opened this discussion on 17 Jun, 2014 09:17 AM

  18. 10 Posted by j_laurant on 17 Jun, 2014 09:17 AM

    j_laurant's Avatar

    I'm still having issues with Berta. I did a update to the newest version and i'm still having problems.

    This method seems to work with the other buttons ("fotografie and toekomst") but not with "contact" and "docent".

    • I have been diging in the storage files. Berta seems to add certain photo's in the same folder. I think this is causing my problem that Berta thinks there are more pictures in one photo and then makes a gallery.
  19. Support Staff 11 Posted by Uldis on 17 Jun, 2014 09:53 AM

    Uldis's Avatar

    1) don't put ID attribute in image caption fields, use entry description field for that
    2) create elements with ID attribute for "contact-anchor", "docent", "midden"

  20. 12 Posted by j_laurant on 17 Jun, 2014 11:45 AM

    j_laurant's Avatar

    Did the trick, thank you!! Otto is also happy that he now knows how anchor points work!

  21. Support Staff 13 Posted by Uldis on 17 Jun, 2014 12:34 PM

    Uldis's Avatar

    Glad to hear it works,
    greetings to Otto

  22. Uldis closed this discussion on 17 Jun, 2014 12:34 PM.

Comments are currently closed for this discussion. You can start a new one.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac